Grillo Climber 9
Hydrostatic ride-on brush cutter equipped with differential lock and front parking brakes, idea for the cut of high grass and bushes downhill and on uneven grounds. With the performing 18HP engines, the Climber 9.22 can climb and perform these tasks with both safety and efficiency. This machine is ideal for working in the countryside agriculture, or in the maintenance of professional and domestic gardening.
The single blade cutter deck has a working width of 91cm. The structure of the whole cutting deck is bulti to be shock resistant. The cutter blade is made from special moulded steel with a low noise output and is fitted with various reversible swing tip blades (sharpened on both sides so they can be reversed once they are worn) and automatic disengagement in case of bumps.
Climber 9.22 is a compact sized machine, with a low centre of gravity and an optimal weight distribution, built to obtain maximum stability under most conditions and offers maximum security for the operator in working areas where there are many slopes. The low positioned seat conveys safety to the operator.
On the most steep slopes Climber 9.22 will climb up with maximum safety, to further increase the safety going down hill, this machine is fitted as standard with drum brakes on the front wheels and are pedal controlled. The extremely small turning radius of only 38cm allows working even in narrow areas, and the low height ideal for working under trees and bushes etc.
The engagment of the blades is made by electric push button positioned near the steering wheel. The cutting height from 30 to 90mm can be adjusted by the driver by means of a lever with 4 cuttign positions. Climber 9.22 is fitted with a 18HP Briggs & Strtton Intek 7220 V Twin Professional Series Petrol engine, with electric start.
Also available in the Climber 9 range is the 9.16, which has the same features as above with the only difference being the HP which is 14, the CC which is 479/2 and a slightly lighter machine at 293kg.