LOLER Inspections for Telehandlers, Loaders and Forklifts in Devon
If a telehandler, tractor loader or forklift lifts anything on your farm or yard, the law says it has to be checked by a competent person at regular intervals. That check is a LOLER thorough examination, and our workshops at Holsworthy, South Molton and Crediton can carry it out for you, often at the same visit as a service.
Here’s what LOLER covers, how often you need it and what to expect when you book.
What is LOLER?
LOLER stands for the Lifting Operations and Lifting Equipment Regulations 1998. It applies to employers and self-employed people who provide lifting equipment for use at work, and to anyone who has control of how that equipment is used. The aim is simple: to make sure a machine that lifts loads over people’s heads is safe to do it.
Part of that duty is a thorough examination, a detailed, systematic check by a competent person looking for wear, damage or defects that could make the machine unsafe.
Which farm machines need a LOLER examination?
The Health and Safety Executive (HSE) lists the common farm lifting equipment as including:
- Telehandlers (telescopic handlers)
- Tractor foreloaders
- Forklift trucks
- Workshop and rope hoists, cranes on machines, and lifting attachments and accessories
One thing that isn’t covered: the three-point linkage on a tractor is not treated as lifting equipment when it’s used with the implements it was designed for.
Our workshops examine telehandlers, tractor foreloaders and forklifts, whatever the make.
How often do you need a LOLER inspection?
Unless a competent person has drawn up an examination scheme for your machine with different intervals, HSE guidance sets these:
| Equipment | How often |
|---|---|
| Lifting equipment, e.g. a telehandler, loader or forklift | Every 12 months |
| Any equipment used to lift people, e.g. with a man-basket or work platform | Every 6 months |
| Lifting accessories | Every 6 months |
A thorough examination is also needed after anything that could affect the machine’s safety, such as damage, a long spell out of use or a major modification.
If you ever use your telehandler with a man-basket or work platform, the six-month interval applies. It’s the one people most often get caught out on.
Isn’t that just part of a service?
No. A service replaces worn parts, changes fluids and makes adjustments to keep the machine running well. A LOLER thorough examination is a separate, systematic check of the parts that keep a load in the air: the boom, pins, bushes, chains, hydraulic rams and hoses, carriage, headstock, load-limiting systems and safety devices.
The two work well together, though. Booking both at the same visit means one trip to the workshop, one lot of downtime, and any fault the examination turns up can often be put right there and then.
What happens during a LOLER examination?
Every machine is different, but a thorough examination will usually include:
- A visual and physical check of the boom or mast, loader arms, pins and bushes for wear, cracks and damage
- Hydraulic rams, hoses and fittings checked for leaks and damage
- The headstock, carriage and attachment locking checked for security
- Load indicators, load-limiting systems and safety devices checked to make sure they work
- A function check of the lifting controls
Afterwards you’ll receive a written report stating what was examined and whether any defects were found.
What if the examination finds a problem?
If a defect is found, the report will say what it is and how urgently it needs putting right. If the defect is serious enough to be dangerous, the machine must come out of use until it’s repaired. You’re breaking the law if you keep using it.
That’s where booking the examination with the dealer who can also do the repair pays off. Our workshops carry genuine parts, and the fix can often be done on the same visit, so you’re not waiting for a second appointment before the machine can work again.
Manitou telehandlers: LOLER and genuine parts in one visit
Every telehandler needs a LOLER examination, and Manitou telehandlers are no exception. They’re built to lift all day, every day: feed, bales, muck and pallets, often at full reach. That’s exactly the kind of work LOLER is there to check.
As Manitou dealers, we sell, service and examine them. We also stock a wide range of genuine Manitou parts, supplied direct from Manitou, from filters and oils to the pins, bushes and wear parts a thorough examination might flag. So if your Manitou needs something put right after its examination, the correct part is usually already on our shelf. Genuine parts mean the right fit, the right quality and more time working.
Book your Manitou in for a service, a LOLER examination and any genuine parts it needs, all in one visit.
How long do you keep LOLER records?
Keep each thorough examination report until the next one is made, or for two years, whichever is later. They don’t have to be on paper, but you need to be able to find them. If anyone asks after an incident, it’s the first document you’ll want to hand over.
Why book it now?
Winter is when the telehandler and loader work hardest: feeding, bedding, muck, bales and yard clearing, often in the dark. It’s also when the workshop diary fills with breakdowns and winter servicing.
October and November are the easy months to book a LOLER examination. Leave it until the new year and you’ll be competing with everyone else whose certificate has just run out.
Book a LOLER examination in Devon
Andrew Symons Ltd carries out LOLER thorough examinations on telehandlers, tractor foreloaders and forklifts at all three of our workshops:
- Holsworthy
- South Molton
- Crediton
Ask us to examine the machine at the same visit as a service and it’s one trip, one lot of downtime.
Sign-Up For Our Newsletter
Receive updates on new products, sales & offers!
Thanks for subscribing! Please check your email for further instructions.